Pengembangan Kursi Laboratorium Komputer Teknik Industri Dengan Metode Pendekatan Ergonomi
Keywords:
industrial engineering laboratory chair development, ergonomics methodAbstract
Static activity and dynamic activity are used as the basis for measuring body size. Ergonomics related to the dimensions of the human body is anthropometry. Anthropometry is needed as a guide in the implementation of adjusting the sizes of work equipment and tools, furniture, clothing, and all equipment that is directly related to humans. Anthropometry is related to measuring the state and physical characteristics of humans from the size of the head, hands, body, hips, to feet. The measurement data is used as a reference for product development according to user needs. Industrial Engineering UNIVERSITY OF PGRI RONGGOLAWE TUBAN (UNIROW) has a computer laboratory with a class area of 99 m², with a capacity of 60 students. One of the computer lab facilities is a laboratory chair that is currently used in the Industrial Engineering computer laboratory at the University of PGRI Ronggolawe Unirow Tuban. It is a chair with an iron frame, a seat mat, and a backrest. The dimensions of the lab chair used today have a chair leg height of 50 cm, a seat width of 50 cm, a backrest height of 60 cm.
Downloads
References
Purnama, J., & HA, A. H. (2016, October). Perancangan Mesin Secara Ergonomi Untuk Meningkatkan Kapasitas Produksi di UKM Mebel. In Prosiding Seminar Nasional Sains dan Teknologi Terapan (pp. 1-8).
Jatmiko, H. A., & Dharmastiti, R. (2018). Pengembangan alat ukur evaluasi dan perancangan produk kursi roda. Jurnal Teknosains, 7(2), 104-110.
Anggunadi, A., & Sutarina, N. (2017). Manfaat Accelerometer untuk Pengukuran Aktivitas Fisik. Jurnal olahraga prestasi, 13(1).
Susanti, E. (2021). PERANCANGAN FASILITAS KERJA AKTIVITAS PENGISIAN TANAH HITAM PADA UKM TANAMAN HIAS RASTI TUNAS REGENCY. Computer and Science Industrial Engineering (COMASIE), 4(3), 106-115.
Latar, M. A. Antropometri dan Aplikasinya Dalam Perancangan Fasilitas Kerja. Esa Unggul University, Jakarta.
Yusup, F. (2018). Uji validitas dan reliabilitas instrumen penelitian kuantitatif. Tarbiyah: Jurnal Ilmiah Kependidikan, 7(1).
Purnamayudhia, O., & Suwondo, A. J. (2021). DESAIN SOFA MULTIFUNGSI DENGAN METODE KANSEI ENGINEERING. Prosiding SNasPPM, 6(1), 188-195.
Dicasani, A., & Purnomo, H. (2016). Desain kemasan bahan dapur berbentuk serbuk dengan menggunakan pendekatan kansei engineering. Teknoin, 22(6).
Dindadhika, K. A. (2018). Desain Ulang Kursi Kuliah yang Inovatif dan Ergonomis.
Ramantyo, R. N. (2019). Analisis penentuan harga pokok produksi sebagai dasar penentuan harga jual pada UD. Abadi Utama Genteng Malang (Doctoral dissertation, Universitas Islam Negeri Maulana Malik Ibrahim).
